MCSR multicrop, header for castor & all row crops
What you can harvest with dual-use MCSR
Castor
Sunflowers
Chickpeas
Sorghum
Models
MCSR multicrop rigid
SFR-R
|
Rows |
Spacing |
|
2 – 16 |
45 – 90 cm |
MCSR Multicrop foldable
Soon available
MCSR Features
All crops
Maximum productivity
Low maintenance
FEATURES
MCSR, the header dedicated to castor bean
NARDI MCSR is the 2 to 16 row header with a minimum row spacing of 45 cm designed for professional mechanized castor bean harvesting. Its design, consisting of a rigid frame, pans with a blowing system, a compact harvesting system, and a large diameter auger with retractable fingers, ensures unparalleled threshing on the market up to 6-10 km/h.
FEATURES
MCSR dual-use, perfect for row crops
The MCSR header is the dual-use solution that can be used for harvesting various row crops, such as sunflowers, chickpeas, and sorghum, in addition to castor beans. Furthermore, every MCSR component is designed to be easily accessible for field maintenance.
MCSR is the perfect choice for the long term:
- Flexibility of use in case of crop production changes
- Large after-market
FEATURES
MCSR dual-use, perfect for row crops
The MCSR header is the dual-use solution that can be used for harvesting various row crops, such as sunflowers, chickpeas, and sorghum, in addition to castor beans. Furthermore, every MCSR component is designed to be easily accessible for field maintenance.
MCSR is the perfect choice for the long term:
- Flexibility of use in case of crop production changes
- Large after-market
MCSR Technology
TECHNOLOGY
Tips and pans
The tips are positioned close to the ground and can position themselves under bushy or flattened plants and float when they touch the ground. The pans are large and designed to cover the spaces between the row units and collect any product that may have fallen from the plant. Tips and pans are easily removable to perform quick maintenance in the field.
TECHNOLOGY
Tips and pans
The tips are positioned close to the ground and can position themselves under bushy or flattened plants and float when they touch the ground. The pans are large and designed to cover the spaces between the row units and collect any product that may have fallen from the plant. Tips and pans are easily removable to perform quick maintenance in the field.
TECHNOLOGY
Row units with rubber blocks or rubber belts
The row units features two chains with interchangeable wear-resistant rubber blocks or belts. This system creates a ‘gear’ effect, enveloping and gripping the plant with the right balance between the combine harvester’s speed and the header’s chain unit speeds. This way, the product remains stable, is not affected by vibrations, and therefore, losses are minimized.
TECHNOLOGY
Row units with rubber blocks or rubber belts
The row units features two chains with interchangeable wear-resistant rubber blocks or belts. This system creates a ‘gear’ effect, enveloping and gripping the plant with the right balance between the combine harvester’s speed and the header’s chain unit speeds. This way, the product remains stable, is not affected by vibrations, and therefore, losses are minimized.
TECHNOLOGY
Cutting system
The cutting system consists of two overlapping wear-resistant daisy discs. They are protected by flat-structured plates and slides made of armored spring steel, which prevent impacts on the ground. All row units have a sealed oil bath gearbox with easy access. Each row unit is connected to the previous one by a telescopic cardan shaft but remains independent for easy maintenance.
TECHNOLOGY
Cutting system
The cutting system consists of two overlapping wear-resistant daisy discs. They are protected by flat-structured plates and slides made of armored spring steel, which prevent impacts on the ground. All row units have a sealed oil bath gearbox with easy access. Each row unit is connected to the previous one by a telescopic cardan shaft but remains independent for easy maintenance.
TECHNOLOGY
Air blow system 
The NARDl patented blower system is designed to prevent product buildup on the pans. Electric motors with blower housings are installed at the tips of the pans. By generating an airflow, they push the seeds towards the auger and simultaneously prevent them from bouncing and falling to the ground.
TECHNOLOGY
Big diameter auger
The MCSR dual-use header mounts a large diameter auger that ensures a homogeneous flow of product to the combine harvester. The auger is equipped with openings covered by removable steel or rubber plates that allow for easy maintenance.
TECHNOLOGY
Big diameter auger
The MCSR dual-use header mounts a large diameter auger that ensures a homogeneous flow of product to the combine harvester. The auger is equipped with openings covered by removable steel or rubber plates that allow for easy maintenance.
TECHNOLOGY
Retractable metal fingers
The auger is equipped with retractable metal fingers arranged in a spiral across its entire width, ensuring a smooth feed flow without stress on the transmissions.
TECHNOLOGY
Openings covered by iron or rubber plates
The auger allow a easy maintenance thanks to removable iron or rubber plates are inserted in the central area with variable position.
TECHNOLOGY
Openings covered by iron or rubber plates
The auger allow a easy maintenance thanks to removable iron or rubber plates are inserted in the central area with variable position.
TECHNOLOGY
Metal net
The metal net contains castor plants that exceed in height, preventing seed dispersal. It has a tight mesh but ensures optimal visibility.
MCSR Optional
OPTIONAL
Brushes kit
Positioned in the space between the pans, the brushes contain the product, reducing potential losses. They have a long lifespan and are easy to assemble.
OPTIONAL
Floating sensor kit
Floating sensor kit is available to mount on tips to keep the header at the same height from the ground automatically.
OPTIONAL
Floating sensor kit
Floating sensor kit is available to mount on tips to keep the header at the same height from the ground automatically.